My meizu m3 s phone does not turn on. Meizu won't turn on. Why doesn't Meizu want to turn on?

Instructions: what to do if the Meizu M3s mini does not turn on is known at our Telemama service center. It is important to correctly identify the breakdown so that it can be properly repaired.

There may be several possible breakdowns.

  1. First of all, try rebooting your phone.
  2. Often the battery fails and will have to be replaced.
  3. It is likely that the connector is damaged. It could have been damaged if the charger was used carelessly.
  4. The power controller may have failed. As a rule, this occurs due to voltage surges or strong shocks.
  5. What to do if the phone does not respond to charging, but the connector itself is intact? In this case, we carry out diagnostics, since the board may have been damaged, and it consists of several components. Often, this problem occurs after liquid gets into the device or due to mechanical impact.

Bottom line: In the first, second or third cases, you can try to carry out the repair yourself. Other damage can only be repaired by specialists.


Price:

Our advantages:

  1. Diagnostics at our service center is free. Let's determine with precision why the Meizu M3S went out and stopped turning on. We have instructions, and you can do the repairs yourself. We always use only high-quality professional equipment.
  2. All our spare parts are original. We buy them only from manufacturers. We have everything needed for repairs, which is why any breakdown will be fixed very quickly.
  3. We have the lowest prices for spare parts and repairs. All thanks to the fact that we cooperate only with manufacturers, and not with intermediaries.
  4. Repair time will depend on the breakdown. If your phone does not turn on, our technicians will try to fix your Meizu M3s mini as quickly as possible.
  5. In any case, customers will be provided with a guarantee upon completion of the repair. The work is always carried out by experienced craftsmen who have extensive experience and are constantly undergoing training.


It happens that Meizu simply stops turning on, for no apparent reason. In some cases, the owner cannot start the device after it is completely discharged, or after being dropped, and it also happens that while the battery is charging, the gadget turns off and no longer works. What could be the reason for such a malfunction, and what actions the user can take independently, we will discuss in the format of this review.

I note that you can only fix system failures on your own, but if the problem lies in hardware components, you will have to contact a service center. It is quite possible that the operating system files are damaged; a hard reset may help, so we’ll start describing possible actions with that.

  • Considering that your Meizu no longer turns on, there is no need to turn it off, just pick up the device.
  • Simultaneously hold down two physical keys on the gadget, volume + and power, also known as the power button.
  • Hold the buttons for a few seconds until a menu appears on the screen.
  • From the items that open, select Clear data and click on start.
  • Now you need to wait for the process to complete and the device will be returned to factory settings.

All your files and downloads will be deleted, and this process is irreversible.

If the hard reset failed to activate and the smartphone still does not turn on, proceed to the next step.

Battery completely discharged

If your Meizu can't turn on, remember the last time you charged it. If the owner allows the battery to completely discharge, the USB cable connected to the PC or laptop will not charge the smartphone. In this case, only the power supply that comes with the phone will help you. That is, you can correct the situation only from the outlet.

Power button

The power button, or rather its breakdown, can also cause you to not turn on your Meizu smartphone. There is a simple method that will allow you to check its functionality; when charging is connected, an image of the battery will be displayed on the screen. If this is really the problem, take the gadget to a service center; experienced technicians can handle the replacement in a matter of minutes.

Other reasons

This is not all that could contribute to such a malfunction. A common breakdown, a burnt-out power controller, is simply impossible to restore on your own, and only a service center technician can diagnose the fault.

Even a broken display module cable will make the owner think that his phone does not turn on. This is why I recommend that you contact professionals; accurate diagnostics using special equipment will show all damaged parts of the device.

What to do if your Meizu smartphone does not turn on? It often happens that either due to playful hands the device stops working, or due to the fault of the manufacturer (hardware or software failure). But what to do in this situation? Today we will briefly tell you what your options may be, both free (solving the problem yourself) and paid (with the help of a local service center). Of course, it won’t be possible without the current prices that we found in different service centers.

What to do?

First you need to understand what the problem is. This step is called diagnosing the problem. Actually, what options can there be if the smartphone does not turn on.


  • The power controller burned out

The battery is completely discharged

This is a very trivial reason, and here you just need to use the charging adapter and give the device about half an hour for the battery to gain sufficient capacity to turn on.
In this aspect there is nothing scary or unsolvable; here you can do everything on your own, right?

No response to the power button

This is a sadder option, since the problem here can be either hardware or software. If it’s a hardware issue (a hardware issue), then you definitely need to take it to a service center for a detailed diagnosis of the problem and, most likely, replacing the button (the least that can happen).
In addition, the problem may also be of a software nature, when you received root rights and tried to reassign actions that were programmed for certain keys. If you don’t know and don’t remember what’s what, then you can simply reset the settings and reflash your smartphone.

The phone hangs on the screensaver (does not boot)

Congratulations - this is a bootlap, or also commonly called a “software brick”. The solution, as they say, is easy! You just need to update your Meizu smartphone to the latest firmware. Why did it happen? The highest probability is that this is your “jamb” when you deleted something with root user privileges or changed, flashed a custom kernel, etc. Therefore, here you can only put yourself in a corner.
And, if you flashed the GAPPS curves, then just find the suitable ones and reflash again (don’t forget about the factory reset, ok?).

The power controller burned out

Well, here we come! This is definitely a ticket to the service center. If they change the controller, you will have to fork out money, both for a new piece of hardware and for the work of the master. You are unlikely to do anything yourself. You will order (where?) and change it yourself (how?).

What are the prices at service centers?

We monitored average prices in service centers in Russia. Keep in mind that at the moment the ruble exchange rate is (against the dollar) 57.5118 (rate of the Central Bank of the Russian Federation).


  • Battery replacement - 2500 rub.

  • Replacing the power button - 1500 rubles.

  • Motherboard repair - from 900 rubles.

  • Firmware - 1000 rub.

  • Repair after moisture ingress - from 900 rubles.

  • Replacement of the power controller - 3500 rubles.

Who will help?

Actually, if you are not sure exactly what problem has come to your Meizu, and you really don’t want to pay someone, then just go to the RuleSmart forum, in the first aid section, and create a topic there. Yes, they will help you. Yes, it's free. We are so kind.
That's all, see you next time!

Meizu m3 note frozen, is heating up and you don’t know what to do with it? In this article you will learn how to force a reboot of a frozen Meizu M3 Note and similar devices on Android.

There can be many reasons why Androids freeze. Lack of RAM for several applications and games open at the same time. Sometimes one powerful application or demanding game is enough for your the smartphone just froze stupidly. Even those androids freeze that in principle should not freeze since you paid a tidy sum for it. Any device needs to be rebooted and it is better to reboot it regularly before it freezes due to errors accumulated during long-term operation of the android. Sometimes Meizu may freeze when you put it on charge, when watching a video, opening Internet pages, and sometimes the screen turns just white. It happens that the phone worked fine in the evening, but when you wake up, it simply does not turn on. It’s good if the battery is removable, but what if the battery is built-in and there is no way to remove it from the phone? It is possible to simply reboot the android, otherwise you would have to take it in for repairs and spend a lot of money.
Below you will find information on how to reboot frozen Meiza and similar androids.

Perhaps this method will also work for other Android smartphones, please leave feedback and indicate the model of the device to which this reboot option worked or did not work.

Let's see what to do if Meizu m3 note is frozen, gets very hot and does not react to anything.
First way. To reboot a frozen Meizu m3 note, you need to press and hold the Android “power/lock” button for about 20 seconds. You need to hold this button without releasing it until your smartphone or tablet reboots.
The device may reboot in less than 20 seconds, or you may have to hold down the power button a little longer.
If it doesn't help, try the second method below.

Second way. If the first method did not help get your Android out of the freeze, then try holding down the “on/off” button and the “volume” button at the same time, hold both buttons until your smartphone or tablet reboots.

We kindly ask you to leave reviews and indicate the model of the device to which one of the reboot methods worked or did not work.

  • I hope you were able to reboot the frozen Meiza and get the phone out of the freeze.
  • We will be glad if you add feedback, additions to the article, or useful tips.
  • Thank you for your responsiveness, mutual assistance and useful advice!


07-08-2019
2 p.m. 05 min.
Message:
Thank you, the first method helped

12-06-2019
21 o'clock 00 min.
Message:
The first method helped immediately! Thanks a lot!

14-09-2018
6 p.m. 42 min.
Message:
M3note does not help, both options... The phone hangs on the logo. Are there any other options?

07-09-2018
10 p.m. 02 min.
Message:
1helped, thanks...

30-08-2018
20 o'clock 58 min.
Message:
thanks, the first option helped)

17-05-2018
03 o'clock 14 min.
Message:
Meizu M3 laptop rebooted when I pressed the on/off button for a long time. Thank you!

25-02-2018
13 o'clock 17 min.
Message:
Yes, the first option worked 👍👍👍Thank you!

14-02-2018
11 p.m. 19 min.
Message:
Thank you very much, the first method helped the stuck meizu m3 note!

14-02-2018
10 p.m. 03 min.
Message:
Thank you! Meizu M3S 3/32 rebooted in 10 seconds!

17-01-2018
19 o'clock 08 min.
Message:
Yes they restart like that

08-01-2018
10 p.m. 08 min.
Message:
Meizu rebooted the tablet using the start block key and held it for 20 seconds.

07-01-2018
21 o'clock 21 min.
Message:
Meizu M3 laptop rebooted after 15 seconds

05-01-2018
6 p.m. 05 min.
Message:
The first method helped to unlock it. Thank you!

14-11-2017
6 p.m. 40 min.
Message:
Thank you, the first method helped!!!

11-11-2017
21 o'clock 29 min.
Message:
meizu m3 note. The device froze at the OS loading stage, holding down the power button for 30 seconds, the device rebooted and started working. Thank you! Glory to Ukraine!!!

03-11-2017
21 o'clock 30 min.
Message:
Thanks a lot! Meizu M3 Note stuck on the Meizu screensaver, holding the power key for 20 seconds helped.

15-08-2017
6 p.m. 09 min.
Message:
Thank you, you helped, rebooted mezu3note in less than 20 seconds, it also froze and got hot

15-08-2017
08 o'clock 01 min.
Message:
The second method worked for me, meizu u10 phone

31-07-2017
03 o'clock 33 min.
Message:
Spamibo is huge. The second method helped. Meizu M3s phone.

13-07-2017
16 o'clock 24 min.
Message:
The first method helped

09-07-2017
00 o'clock 07 min.
Message:
The described 1st method helped to “revive” the phone.

01-07-2017
11 o'clock 23 min.
Message:
For Meizu M3 Max, when hanging, I held the power button for 10 seconds. The phone started working.

22-06-2017
17 o'clock 31 min.
Message:
Thank you, the first method helped! Meizu M3s

21-06-2017
19 o'clock 58 min.
Message:
The first method helped! THANK YOU!!!

11-06-2017
6 p.m. 44 min.
Message:
Thank you very much. The second method helped. Thanks again

21-05-2017
20 o'clock 00 min.
Message:
A white screen with flags appears and it reboots, what should I do?

13-05-2017
13 o'clock 26 min.
Message:
Meizu m3 note the screen flickers slowly, after a reboot the screen still flickers slowly and does not respond to touches, but when you press the off button on the right, the turn off or restart panel lights up, then it responds to touches and can be turned off or restarted.

09-05-2017
2 p.m. 05 min.
Message:
Pressed it for 20 seconds and everything was fine! Thanks!!!

30-04-2017
17 o'clock 24 min.
Message:
For half an hour there is a black background and the inscription Flyme on the screen. I rebooted using the 1st method, after which information about application optimization came out. Thank you, it helped. This was not the case before the Flyme update.

23-04-2017
02 o'clock 10 min.
Message:
Method 1 helped for 12 seconds and it rebooted. Thank you 😊

25-03-2017
6 p.m. 13 min.
Message:
A method to help with the on/off button for meizu m3 s, I kept pressing the button until I started to reboot)) Wow!) Otherwise I didn’t even know how to work with it))

14-03-2017
11 o'clock 04 min.
Message:
At first the sensor started to slow down, and then a screen appeared with the inscription Flyme and that’s it... Option 1 helped. The m4note came to life, but I’m sitting and waiting for the applications to be optimized. Before Flaym was updated there were no such problems ((((

04-03-2017
2 p.m. 15 minutes.
Message:
Thanks a lot! The first method helped, I set the Meizu M3 Note to restart, and the loading screen just froze, but I rebooted using the first method, and everything worked out)

28-02-2017
20 o'clock 30 min.
Message:
The first method was to launch Meiza M3 MAX. Thank you

15-02-2017
13 o'clock 38 min.
Message:
Menu is the first method. MEIZU M 3 MAX phone OVERLOAD IN 10 SECONDS.

07-02-2017
05 o'clock 22 min.
Message:
Thank you very much, the first method helped!!!

28-01-2017
16 o'clock 03 min.
Message:
The phone froze when resetting the factory settings using the side buttons, what should I do? For a long time now, just a meizu screensaver. Power button does not respond

18-01-2017
11 p.m. 02 min.
Message:
thank you, method 1 helped

31-12-2016
12 o'clock 57 min.
Message:
thanks for the help

12-11-2016
10 p.m. 02 min.
Message:
Thanks, I rebooted.

08-11-2016
04 o'clock 18 min.
Message:
Thank you, method 1 helped!

Instructions: if Meizu M3 Note does not turn on, we know what to do. It is important to first correctly identify the breakdown. After that we will tell you what to do.

  1. First of all, try to restart your phone. Perhaps this will help solve the problem.
  2. The battery may have failed. What to do? In this case, the part will have to be changed
  3. If the Meizu M3 Note does not turn on after it is discharged, first of all you need to inspect the connector itself. It may be damaged, which often occurs due to careless use.
  4. The power controller could fail due to voltage surges or shocks. In this case, it changes immediately.
  5. If the phone does not turn on, but the connector is intact, then it is quite possible that the harness or board is damaged. Such a breakdown could also occur after liquid penetrated into the device. In any case, we will definitely carry out diagnostics. We will determine the problem and only then tell you what the problem is.

Bottom line: In the first, second or third case, you can try to repair the phone yourself. In all other cases, only professionals can solve the problem.


Our advantages

  1. We will be able to tell why the Meizu M3 Note does not turn on immediately after we diagnose the phone. The service is completely free under any circumstances.
  2. If the Meizu M3 note goes out and stops turning on, we have instructions and you can do the repair yourself. In addition, all spare parts are in stock. We purchase them from manufacturers immediately in large wholesale.
  3. We have the lowest prices and you can personally convince yourself of this. Check out the full price list, it shows the cost of parts and services themselves.
  4. If the repair is carried out by our specialists, they will do everything as quickly as possible, since all the necessary parts and professional equipment are at hand. You will very soon be able to pick up the device and continue using it.
  5. We will provide a guarantee for up to 1 year on all original spare parts. Our technicians are confident that your phone will function perfectly. Moreover, they always undergo training and are able to solve the problem if Meizu M3 Note does not turn on.